Patch jeans knee iron

Step 1: Take a colored fabric for your jeans. If you want it to work perfectly, go for the opposite color. If you have faded jeans, settle for dark-colored fabric and vice-versa. Step 3: Make stitches as you desire, and you are ready! If you do it on both sides of the knee, it will look even better! It will save you a lot of money too! Step 3 : Take some fabric out to make it look you have paid a lot for the artfully ripped jeans!

Step 3 : Attach the fabric with stitches or glue. Best Friction Fighter Jeans. Yes, when it comes to patching jeans, the iron-on method works. It makes patching easy for you. Here, you will need an iron along with an iron board. To make the patch permanently, you will need whip-stitches around it. If you want an emergency solution, it is better to take the ripped and loose fabric from the other side.

Take them to the inside of the garment. Then pull the little fibers so that you can lose the thread. For safety, add a tape from the inside.

You might have seen jeans with holes. When you walk, the inner thighs rub together and create friction. As a result, the material wears in that particular spot fast. And so, you get holes in your pants! I hope you have got all the ideas on how to patch jeans within this period.

All you have to do is keep the fabric and the thread ready. So that whenever your jeans need to be patched, you can do it without wasting money on new jeans! Let us know which method you follow! In his day-to-day work as a Menswear Stylist, he has to dress his clients to look their absolute best in their personal lives. Follow Me On Twitter-. Save my name, email, and website in this browser for the next time I comment. All of the patches were placed on the upper, inner thigh area of stretch jeans.

The area was stretched after each set of stitches, and the fusing, to test if it would still stretch and also recover after being stretched. The jeans I sewed the patches onto are made with 2-way stretch denim, stretching across the jeans.

I did not try 4-way stretch jeans, jeans which stretch in all directions. I believe the results would be the same. Patches start with cutting out a piece of fabric larger than the hole you need to cover. How you finish the raw edges of the patch can vary depending on what look you want or where the patch is going.

You could fold the raw edges under and press. When patching with denim and other thick fabrics the edges can appear bulky and the corners are bulky. Simply snip off the tips of the corners to reduce the bulk there. Pressing flat with a hot steam iron will help give a crisp edge to the patch. With a sewing machine, you could sew a zig-zag stitch set at a short stitch length about a 2 to encase the edge.

If your patch is going where a sewing machine can reach, use it. Just remember to use a universal or ball point needle and not a denim needle. Like you, I never cut the remaining threads, preferring to make them part of the patch for strength and color variation. This is exactly what i was looking for My son is 4 and his jeans are pretty little. Reply 10 years ago on Introduction.

I am able to remove a portion of the sewing machine arm so that it is more narrow and I scrunch up the rest of the jeans around it if I have to. As long as everything is pinned down well you don't have to worry about too much shifting. If the jeans are super small you can open up a side seam to gain access and then re-sew it when you're done. The jeans patched in these photos are size 5T. It is going to be tough to work with when you need to cut and sew as well as fine-tune the material so it fits the hole just right.

But it may be worth it in the long run as the knees on the jeans, etc. However, even though the kevlar is on the material protecting it from holes, it does not protect the stitching or the thread.

The thread can easily be worn out and you will have to re-stitch the patch to continue protecting the knees. It is obvious that your teenager or little kid will not be encountering the same rough situations as a motorcycle rider does when the bike goes down. But they will be giving their pants a lot of rough treatment which may still rub those threads raw.

That means you may have to resew the kevlar patch several times before the patch begins to wear out. The pants may wear out faster than the patch will and you will be dealing with other issues than the hole in the knees.

This is not going to be a hard task to do. We know we say that a lot but it is true when we say it. If we can find the different outlets very easily in a quick internet search, then we know you can as well. As we mentioned earlier, Amazon does sell these types of pants. They can be jeans or cargo pants but they are readily available and the only issue you will have to deal with is making sure they fit right.

Etsy and Wrangler have them as well. This is a need that manufacturers have decided to meet so you are not going to have a lot of difficulties finding these types of pants. Your local department store may have them in stock as should other clothing stores. Women should also have an easy time finding these jeans for themselves or their daughters. We are not being sexist here, it is just a simple fact that women have more fashion outlet options than men do.

As you already know, patches or reinforced pants are the main options you have in preventing holes from developing in your pants. You can easily find iron-on patches that will be a quick fix to the problem.

By quick fix, we mean that they go on fast and stay on without a lot of work. How long they last will depend on the material those patches are made from and how active the pants wearer is. Hand sewn patches can be bought or just as easily made from your fabric stash.