Cde removed solaris 10 update coopersmith

See the following example:. In the InputDevice section that contains the line Identifier "Mouse0" , apply the following changes:. The following warning message might be displayed:. Support is available with the Xsun server. To configure the Xsun server to use these chipsets, follow these steps:. If your x86 system is using Xorg as the default Xserver, the Arabic font iso does not appear in the ar locale. This error does not occur if you are using XSun instead of XOrg. Default time settings might cause the use of key combinations to fail to start these technologies:.

Workaround: Follow these steps to start these technologies by using the keyboard when you log in. A problem occurs if you configure the Magnifier with two virtual or physical video devices in the following manner:. In this configuration, the key combination Ctrl-Esc cannot open the Launch menu on the magnified second desktop system.

When the error occurs, the GUI generates a core dump. Instead, you need to set these user preferences by using a physical keyboard and mouse device. Workaround: After you have set the system to use an extended device, perform the following procedures in sequence. First, set GOK to ensure that the core pointer is controlled by the primary mouse device. Other extended devices are then reserved for use by AT applications.

Follow these steps when starting GOK for the first time:. In the window that prompts you to use core pointer mode, use the arrow keys to highlight Cancel, then press Enter. GNOME applications do not start if you log in remotely and enable accessibility in gnome-at-properties. To revert to the default desktop settings in which accessibility is disabled, close the GNOME session.

Issue the following command:. If you use the JumpStart installation method, the process might use a system identification configuration sysidcfg file. This file is used to generate a specific Xsun configuration file for a system. The Xsun configuration portion of a sysidcfg file is created by the command kdmconfig -d filename.

However, on systems that use the default Xorg server, the command does not create a file with any Xorg configuration information.

Consequently, you cannot use the JumpStart method on these systems without some additional preparatory steps. Workaround: Before using the JumpStart installation method on a system that uses the Xorg server, perform the following steps. Prepare a specific xorg. Store this file in the JumpStart directory of the JumpStart server. For instructions to create an xorg. Create a finish script that copies the xorg. For example, the script might include the following line:.

In the custom JumpStart rules file, include the finish script in the rules entry for systems of the type that you want to install. Chapter 4 includes information about the JumpStart rules file, while Chapter 5 contains a section about finish scripts.

Instructions that are provided in the kdmconfig program to configure the Xorg server are incomplete. The program lists basic instructions to generate an xorg. However, some relevant information is unavailable. For example, options in the xorg. Some scripts that start the Xorg server use smf 5 repository properties.

The following properties are relevant to the Xorg server:. You can set and retrieve these properties by becoming superuser and using the svccfg command, as shown in the following example:. In this current Solaris 10 release, the default X server has changed from Xsun to Xorg. The program that configures keyboard, display, and mouse kdmconfig applies only to the Xsun server.

The program has no effect on Xorg server configuration. Consequently, you cannot use kdmconfig to configure the Xorg server. While kdmconfig allows you to select which server to use, kdmconfig only configures the Xsun server. This directory is not in the default man page path. To view these man pages, use one of the following options:.

Support is available with the Xsun server. To configure the Xsun server to use these chipsets, follow these steps:. If your x86 system is using Xorg as the default Xserver, the Arabic font iso does not appear in the ar locale. This error does not occur if you are using XSun instead of XOrg. Some Compose key sequences might not work in locales that do not use keyboard input methods, such as the C locale.

The error occurs if either of the following system configurations is used in those locales:. Specifically, Compose sequences in these systems fail if the sequence requires the use of the Shift key to type one of the characters.

The appendix provides a list of available sequences, some of which have alternate sequences that do not use the Shift key. Log in by using a locale that uses keyboard input methods, such as any of the available UTF-8 locales.

If you use the JumpStart installation method, the process might use a system identification configuration sysidcfg file.

This file is used to generate a specific Xsun configuration file for a system. The Xsun configuration portion of a sysidcfg file is created by the command kdmconfig -d filename.

However, on systems that use the default Xorg server, the command does not create a file with any Xorg configuration information. Consequently, you cannot use the JumpStart method on these systems without some additional preparatory steps. Workaround: Before using the JumpStart installation method on a system that uses the Xorg server, perform the following steps. Prepare a specific xorg.

Store this file in the JumpStart directory of the JumpStart server. For instructions to create an xorg. Create a finish script that copies the xorg. For example, the script might include the following line:. In the custom JumpStart rules file, include the finish script in the rules entry for systems of the type that you want to install. Chapter 4 includes information about the JumpStart rules file, while Chapter 5 contains a section about finish scripts.

Instructions that are provided in the kdmconfig program to configure the Xorg server are incomplete. The program lists basic instructions to generate an xorg. However, some relevant information is unavailable. For example, options in the xorg. Some scripts that start the Xorg server use smf 5 repository properties. The following properties are relevant to the Xorg server:.

You can set and retrieve these properties by becoming superuser and using the svccfg command, as shown in the following example:. In this current Solaris 10 release, the default X server has changed from Xsun to Xorg. The program that configures keyboard, display, and mouse kdmconfig applies only to the Xsun server. The program has no effect on Xorg server configuration. Consequently, you cannot use kdmconfig to configure the Xorg server. While kdmconfig allows you to select which server to use, kdmconfig only configures the Xsun server.

This directory is not in the default man page path. To view these man pages, use one of the following options:. Note - Xorg command line options can override xorg. See the man pages for more details about options to use with Xorg. Workaround: To use these locales, log in to any other UTF-8 locale.

For example:.